Category Archives for "Case Study"

Case Study: Nassau County Department of Public Works Hicksville Garage HVAC Renovation

This project was a team effort between ATI, a local contracting service, and Nassau County personnel. The County’s lead engineer on the project was Adrian Cavanagh P.E.The ProjectThe Nassau County Department of Public Works needed a complete upgrade to their boiler equipment. This included replacement of existing:BoilersBurnersFuel oil pump setLead/lag panelPumpsExpansion tankAir separatorFor a job […]

Case Study: Mikkeller Brewery, Citi Field, Queens, NY

This project was designed in-house in conjunction with ME Engineers of NY City.  The lead engineer was Senior Associate Joseph Franconi, P.E.ATI was called upon to provide a process steam solution for Citi Field’s newest microbrewery located on the perimeter of the home of the New York Mets.The primary challenge was the lack of space […]

Case Study: Expanding the Capabilities of LNK International

Nestled in Hauppauge, New York, LNK International is one of the largest manufacturers of liquid dose and solid dose, over-the-counter pharmaceuticals. As a family owned and operated company, LNK International has spent the last three decades developing an impeccable reputation for delivering the best quality products, driving innovation, and backing it all up with outstanding […]

Helping Create Culinary Excellence with Expert Boiler Selection

Conveniently situated adjacent to the picturesque Harriman State Park in the Hudson Valley Region of New York State is the town of Monroe — home to KJ Poultry, the largest kosher poultry plant on the eastern seaboard. KJ Poultry employs more than 250 dedicated workers who are all focused on delivering the highest quality, all-natural […]

Case Study: IBM

CASE STUDY DETAILS Company: IBM – Somers, NY Engineer: JMV EngineeringContractor: Skanska The Central Heating Plant boilers were in ill repair and in need of replacement. Height restrictions in the mechanical space limited the boiler room options. ATI was called upon to provide a solution to supply two (2) 600 HP, #2 oil fired Low […]

Case Study: Regeneron Pharmaceuticals

CASE STUDY DETAILS Company: Regeneron Pharmaceuticals – Tarrytown, NY Engineer: Vanderweil EngineeringContractor: The Pike Company Regeneron Pharmaceuticals, Inc. is a biotechnology company headquartered in Tarrytown, New York. The company was founded in 1988. Originally focused on neurotrophic factors and their regenerative capabilities (thus the name), it branched out into the study of both cytokine and tyrosine kinase receptors. The Pike Company […]

Case Study: East River Housing

CASE STUDY DETAILS Company: East River Housing Engineer: G. Goldman EngineeringContractor: Dynamic Mechanical Climate Change & Environmental Services (CCES) managed the construction management and environmental permitting for a major boiler modernization project for a large apartment complex in NYC that has reduced emissions and saved substantial energy costs. East River Housing (ERH) Corporation operates a boiler house providing […]

Case Study: Amneal Pharmaceuticals

CASE STUDY DETAILS Location: Amneal Pharmaceuticals – Yaphank, NY Engineer: WSP EngineeringContractor: Kulka Construction/Mechanical Energy Solutions Amneal Pharmaceuticals is a rapidly expanding pharmaceutical manufacturing company with many locations throughout the US and the world. ATI was called in by Kulka construction to facilitate and provide equipment for a new high pressure steam plant for the manufacturing of pharmaceutical […]

Case Study: PepsiCo

CASE STUDY DETAILS Company: PepsiCo – Purchase, NY Engineer: Robert Derector AssociatesContractor: Paverini Construction & B.P. Mechanical The entire mechanical room at Pepsi Headquarters in Purchase NY was marked for replacement including all boilers, chillers and associated mechanical systems. In an effort to increase efficiency and reduce carbon footprint, Pepsi decided to replace the entire boiler plant with condensing […]

Case Study: NY Presbyterian Hospital

CASE STUDY DETAILS Organization: NY Presbyterian Hospital – NYC Engineer: Cosentini AssociatesContractor: HTS & Nelson Air New York Presbyterian Hospital (NYPH) required a new high pressure steam plant to facilitate sterilization and humidity control for a new critical surgical process for spinal cord injury treatment. This vitally important project was time sensitive and had many challenges with […]